Our Products | Fiber Optic Passive Encoder.

How to know if your Fiber Optic Passive Encoder is suitable for the PTZ camera?

1. You:
   1. should be happy to know that all reputable manufacturers do manufacturer the encoders with a defaulted RS485 OR
   2. RS232 connector as standard, thus connectivity for the PTZ is very possible.
2. Take a photo of the Encoder from the front and the back and showing the really small details written on the Encoder. (if not
   possible)
3. Please look for an RS485 or RS232 connector on the rear of the device near the BNC jack for the camera.
4. Once you identify the RS485 or RS232 connector, you are ready to connect the PTZ camera to it.
5. Please connect the PTZ twisted pair wires to the RS485 or RS232 connector at the encoder near the camera.
6. Connect the Joystick twisted pair wires to the RS485 or RS232 connector at the encoder near the Joystick at the customer control room.
7. You should have 100% functionality of the PTZ camera.